Home
Suppliers

No supplier

Best Sellers
All best sellers

contact our team









 

List of products by brand StepMotech

StepMotech

Active filters
48V 40W 300RPM Geared Brushless DC Motor 1.03Nm(145.86oz.in) 10:1 Spur Gearbox Quick view

Reference: F4B40-48GN-30S/4GN10K

Brand: StepMotech

48V 40W 300RPM Geared Brushless DC Motor 1.03Nm[145.86oz.in] 10:1 Spur Gearbox

Review(s): 0
This is a 48V 40W brushless DC gear Motor with a flange of 80x80mm. The built-in 10:1 spur gearbox brings speed and torque to 300rpm and 1.03Nm(145.86oz.in). Due to its compact structure, high efficiency, low noise, long life, strong controllability, brushless DC gear motors are widely used in industrial automation, home appliances, medical equipment,...
$54.54
More
In stock
Nema 14 Stepper Motor Bipolar L_34mm w/ Gear Ratio 100:1 EG Series Planetary Gearbox Quick view

Reference: 14HS13-1004S-EGS100

Brand: StepMotech

Nema 14 Stepper Motor Bipolar L_34mm w/ Gear Ratio 100:1 EG Series Planetary Gearbox

Review(s): 0
This Nema 14 stepper motor comes with a holding torque of 0.18Nm(25.49oz.in) and is equipped with a high-precision EG series gearbox with a gear ratio of 100:1. Compared to the motors with PG series gearboxes, precision and accuracy of this motor with EG series gearbox has been significantly improved, with a maximum backlash of up to 25arcmin.With its...
$57.90
More
In stock
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.8Nm(113.29oz.in) 20-36VDC w/ 14-bit Encoder Quick view

Reference: iCL42-08

Brand: StepMotech

iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.8Nm[113.29oz.in] 20_36VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements...
$69.49
More
In stock
Brushed 24V 60W 2.70Nm(382.35oz.in) 150RPM w/ 20:1 Right Angle Gearbox DC Gear Motor Quick view

Reference: F4D60-24GN-30S/4GN20RT

Brand: StepMotech

Brushed 24V 60W 2.70Nm[382.35oz.in] 150RPM w/ 20:1 Right Angle Gearbox DC Gear Motor

Review(s): 0
This is a 24V 60W DC gear motor with a flange of 80x80mm. The built-in 20:1 keyway shaft right angle Gearbox brings speed and torque to 150rpm and 2.70Nm(382.35oz.in). The right-angle gearbox's advantages of efficient transmission, strong load-bearing capacity, ability to change transmission direction make this motor widely used in household appliances,...
$84.59
More
In stock
Brushed 12V 30W 5.00Nm(708.06oz.in) 9RPM w/ 200:1 Spur Gearbox DC Gear Motor Quick view

Reference: F3D30-12GN-18S/3GN200K

Brand: StepMotech

Brushed 12V 30W 5.00Nm[708.06oz.in] 9RPM w/ 200:1 Spur Gearbox DC Gear Motor

Review(s): 0
This is a 12V 30W DC gear motor with a flange of 70x70mm. The built-in 200:1 spur Gearbox brings speed and torque to 9rpm and 5.00Nm(708.06oz.in). Due to its simple structure, low maintenance cost, and smooth operation, brushed DC gear motors are widely used in industrial production automation, logistics packaging equipment, medical equipment, photography...
$30.48
More
In stock
HHT Series Harmonic Drive Gearbox Φ80mm Ratio 50:1 Backlash 20arcsec 19mm Input Diameter Quick view

Reference: HHT-17-50-III-D19

Brand: StepMotech

HHT Series Harmonic Drive Gearbox Φ80mm Ratio 50:1 Backlash 20arcsec 19mm Input Diameter

Review(s): 0
This harmonic gearbox has a gear ratio of 50, a frame size of Φ80mm and an input shaft diameter of 19mm and a maximum backlash of 20arcsec.The HHT series harmonic gearboxes feature in integrated wave generator, large diameter hollow shaft hole and compact structure. The flexspline and the rigid spline are connected through high-rigidity cross bearings,...
$268.84
More
In stock
MRVR025 Worm Drive Gearbox 10:1 Ratio Φ9mm Input Shaft with 56B14 Motor Input Flange Quick view

Reference: MRVR025BB3-G10-D9

Brand: StepMotech

MRVR025 Worm Drive Gearbox 10:1 Ratio Φ9mm Input Shaft with 56B14 Motor Input Flange

Review(s): 0
This MRVR025 series worm gearbox, with a gear ratio of 10 and an input shaft diameter of 9mm, is suitable for all standard IEC motors with frame 56B14. Different from low-quality worm gearboxes on the market, stepmotech's worm gearboxes use the highest standard Tin Bronze Cu Sn12 Ni2 for the worm wheel and long-life synthetic oil (ISO VG 320) for the...
$21.85
More
In stock
Back to top