This is a Nema 23 integrated closed loop stepper motor with a holding torque of 3.1Nm(439oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced...

$89.18

In stock

6W 220VAC 50Hz 270RPM 0.18Nm(25.49oz.in) Flange 60mm Spur Gearbox Single-phase AC Induction Motor

Quick view

Reference: 2IK6GN-C/2GN5K

Brand: StepMotech

6W 220VAC 50Hz 270RPM 0.18Nm[25.49oz.in] Flange 60mm Spur Gearbox Single_phase AC Induction Motor

Review(s): 0

$25.29

In stock

Brushed 24V 60W 8.00Nm(1132.90oz.in) 36RPM w/ 50:1 Right Angle Gearbox DC Gear Motor

Quick view

Reference: F4D60-24GN-18S/4GN50RT

Brand: StepMotech

Brushed 24V 60W 8.00Nm[1132.90oz.in] 36RPM w/ 50:1 Right Angle Gearbox DC Gear Motor

Review(s): 0

This is a 24V 60W DC gear motor with a flange of 80x80mm. The built-in 50:1 keyway shaft right angle Gearbox brings speed and torque to 36rpm and 8.00Nm(1132.90oz.in). The right-angle gearbox's advantages of efficient transmission, strong load-bearing capacity, ability to change transmission direction make this motor widely used in household appliances,...

$84.59

In stock

Brushed 12V 10W 1.93Nm(273.31oz.in) 36RPM w/ 50:1 Spur Gearbox DC Gear Motor

Quick view

Reference: F2D10-12GN-18S/2GN50K

Brand: StepMotech

Brushed 12V 10W 1.93Nm[273.31oz.in] 36RPM w/ 50:1 Spur Gearbox DC Gear Motor

Review(s): 0

This is a 12V 10W DC gear motor with a flange of 60x60mm. The built-in 50:1 spur Gearbox brings speed and torque to 36rpm and 1.93Nm(273.31oz.in). Due to its simple structure, low maintenance cost, and smooth operation, brushed DC gear motors are widely used in industrial production automation, logistics packaging equipment, medical equipment, photography...

$24.84

In stock

MRVR030 Worm Drive Gearbox 50:1 Ratio Φ9mm Input Shaft with 56B5 Motor Input Flange

Quick view

Reference: MRVR030AB3-G50-D9

Brand: StepMotech

MRVR030 Worm Drive Gearbox 50:1 Ratio Φ9mm Input Shaft with 56B5 Motor Input Flange

Review(s): 0

This MRVR030 series worm gearbox, with a gear ratio of 50 and an input shaft diameter of 9mm, is suitable for all standard IEC motors with frame 56B5. Different from low-quality worm gearboxes on the market, stepmotech's worm gearboxes use the highest standard Tin Bronze Cu Sn12 Ni2 for the worm wheel and long-life synthetic oil (ISO VG 320) for the...

$22.44