Home
Suppliers

No supplier

Best Sellers
All best sellers

contact our team








 
Nema 23 Integrated Stepper Motor 126Ncm(178.4oz.in) w/ Controller ISC04 12-38VDC
  • Nema 23 Integrated Stepper Motor 126Ncm(178.4oz.in) w/ Controller ISC04 12-38VDC
  • Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC
  • Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC
  • Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC
  • Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC
  • Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC
  • Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC

Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC

ISC04-10
StepMotech
Rating 
$54.24
Quantity

Ask about the product on WhatsApp
Description

Electrical Specifications

  • Manufacturer Part Number: ISC04-10
  • Step Angle: 1.8deg
  • Holding Torque: 126Ncm(178.4oz.in)
  • Rated Current/phase: 2.8A
  • Phase Resistance: 0.9ohms
  • Inductance: 2.5mH ± 20%(1KHz)

Physical Specifications

  • Frame Size: 57 x 57mm
  • Body Length: 75mm
  • Shaft Diameter: Φ6.35mm
  • Shaft Length: 21mm
  • Weight: 818g

Driver Specifications

  • Output Peak Current: 1.5 - 4A
  • Input Voltage: 12 - 38VDC
  • Insulation Class: B 130°C[266°F]
  • Speed control through external potentiometer 0. 75 - 1250RPM
  • Isolation Resistance: More than 100MΩ
  • Dielectric strength: 500VAC for 1MIN.

Connection

V+
GND
ENA
ON
H/L
DIR
Vr
SPD
Red
Black
Blue
White
Yellow
Green
Orange
Purple
Product Details
ISC04-10

Data sheet

Frame Size(mm)
Nema 23 (57 x 57)
Body Length(mm)
75
Shaft Diameter(mm)
6.35
Holding Torque(Ncm)
126
SKU_certificated
ISO, CE
Inventory Method
Dedicated Inventory
Product Type
Integrated Stepper Motor
IP Rating
40
Holding Torque(oz.in)
178.4
Shaft Length(mm)
21
Control Modes
Pulse Mode
Analog Input
Yes
Encoder Feedback
No (Open Loop)
Input Voltage Reference(V)
12 - 36DC
Input Voltage (V)
12 - 38DC
Reviews

No customer reviews for the moment.

Write your review

Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC

Nema 23 Integrated Stepper Motor 126Ncm[178.4oz.in] w/ Controller ISC04 12_38VDC

Write your review
16 other products in the same category:
ESS Series 0.48Nm(68.00oz.in) Nema 17 Integrated RS485 Closed Loop Stepper Servo Motor 24VDC 1000CPR Quick view

Reference: ESS17-RS04

Brand: StepMotech

ESS Series 0.48Nm[68.00oz.in] Nema 17 Integrated RS485 Closed Loop Stepper Servo Motor 24VDC 1000CPR

Review(s): 0
The NEMA 17 integrated stepper motor features a holding torque of 0.48Nm(68oz.in), peak current range of 0.8 to 2.0A, input voltage of 24VDC, and a 1000cpr incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.This compact and reliable motion control solution is ideal for industrial automation,...
$61.95
More
In stock
ESS Series 1.2Nm(169.93oz.in) Nema 23 Integrated RS485 Closed Loop Stepper Servo Motor 24-48VDC 1000CPR Quick view

Reference: ESS23-RS10

Brand: StepMotech

ESS Series 1.2Nm[169.93oz.in] Nema 23 Integrated RS485 Closed Loop Stepper Servo Motor 24_48VDC 1000CPR

Review(s): 0
The NEMA 23 integrated stepper motor features a holding torque of 1.2Nm(169.93oz.in), peak current range of 1.0 to 4.0A, input voltage of 24 - 48VDC, and a 1000cpr incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.This compact and reliable motion control solution is ideal for industrial...
$67.79
More
In stock
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 3.1Nm(439oz.in) 20-50VDC w/ 14-bit Encoder Quick view

Reference: iCLD57-31

Brand: StepMotech

iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 3.1Nm[439oz.in] 20_50VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 3.1Nm(439oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements advanced...
$89.18
More
In stock
iDM Series NEMA 17 Integrated Stepper Motor 0.8Nm(113.29oz.in) 20-36VDC Quick view

Reference: iDM42-08

Brand: StepMotech

iDM Series NEMA 17 Integrated Stepper Motor 0.8Nm[113.29oz.in] 20_36VDC

Review(s): 0
This is a Nema 17 integrated stepper motor with a holding torque of 0.8Nm(113.29oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of stepmotech based on its tens of years' experience in stepper and servo controls. Its compact size can save mounting space, eliminate motor wiring time, reduce...
$60.25
More
In stock
iDM Series NEMA 23 Integrated Stepper Motor 2.3Nm(325.71oz.in) 20-50VDC Quick view

Reference: iDM57-23

Brand: StepMotech

iDM Series NEMA 23 Integrated Stepper Motor 2.3Nm[325.71oz.in] 20_50VDC

Review(s): 0
This is a Nema 23 integrated stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of stepmotech based on its tens of years' experience in stepper and servo controls. At very compact size can save mounting space, eliminate motor wiring time,...
$70.98
More
In stock
iCL Series NEMA 17 Integrated RS485 Closed Loop Stepper Motor 0.8Nm(113.29oz.in) 20-36VDC w/ 14-bit Encoder Quick view

Reference: iCL42-RS08

Brand: StepMotech

iCL Series NEMA 17 Integrated RS485 Closed Loop Stepper Motor 0.8Nm[113.29oz.in] 20_36VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 17 integrated RS485 closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL-RS Series is stepper motors integrated 14-bit incremental magnetic encoder and drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the...
$83.81
More
In stock
iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.8Nm(113.29oz.in) 20-36VDC Quick view

Reference: iDM42-RS08

Brand: StepMotech

iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.8Nm[113.29oz.in] 20_36VDC

Review(s): 0
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.8Nm(113.29oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the PLC in most of point-to-point applications to reduce...
$74.86
More
In stock
iDM Series NEMA 23 Integrated Stepper Motor 1.3Nm(184.1oz.in) 20-50VDC Quick view

Reference: iDM57-13

Brand: StepMotech

iDM Series NEMA 23 Integrated Stepper Motor 1.3Nm[184.1oz.in] 20_50VDC

Review(s): 0
This is a Nema 23 integrated stepper motor with a holding torque of 1.3Nm(184.1oz.in) . iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of stepmotech based on its tens of years' experience in stepper and servo controls. At very compact size can save mounting space, eliminate motor wiring time,...
$64.72
More
In stock
iDM Series NEMA 23 Integrated RS485 Stepper Motor 2.3Nm(325.71oz.in) 20-50VDC Quick view

Reference: iDM57-RS23

Brand: StepMotech

iDM Series NEMA 23 Integrated RS485 Stepper Motor 2.3Nm[325.71oz.in] 20_50VDC

Review(s): 0
This is a Nema 23 integrated RS485 stepper motor with a holding torque of 2.3Nm(325.71oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the PLC in most of point-to-point applications to reduce...
$85.30
More
In stock
iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm(56.64oz.in) 20-36VDC Quick view

Reference: iDM42-RS06

Brand: StepMotech

iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC

Review(s): 0
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.4Nm(56.64oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the PLC in most of point-to-point applications to reduce cost....
$70.09
More
In stock
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.6Nm(84.96oz.in) 20-36VDC w/ 14-bit Encoder Quick view

Reference: iCL42-06

Brand: StepMotech

iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.6Nm[84.96oz.in] 20_36VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.6Nm(84.96oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements...
$64.72
More
In stock
Integrated Stepper Servo Motor 2Nm(283oz.in) 24-50VDC NEMA 23 Closed Loop Quick view

Reference: ISS23-20

Brand: StepMotech

Integrated Stepper Servo Motor 2Nm[283oz.in] 24_50VDC NEMA 23 Closed Loop

Review(s): 0
The ISS23-20 Integrated Stepper Servo Motor is merged the stepper servo driver and motor together. This motor system integrates the servo control technology into the digital stepper drive perfectly. And this product adopts an optical encoder with high speed position sampling feedback of 50 μs, once the position deviation appears, it will be fixed...
$0.00
More
In stock