YS Series 4 Axis Stepper CNC Kit 1.9Nm[269.06oz.in] Nema 23 Stepper Motor & Driver & 48V Power Supply

• 4 x 23HS30-2804S2: Nema 23 Bipolar 1.9Nm(269.06oz.in) 2.8A 57x57x76.5mm 4 Wires Φ8mm Shaft
• 4 x DM542Y: Y Series Digital Stepper Driver 1.0-4.2A DC20V-50V for Nema 17, 23, 24 Stepper Motor
• 1 x S-500-48: 500W 48V 10.5A 115/230V Switching Power Supply

Motor Specification

• Manufacturer Part Number: 23HS30-2804S2
• Motor Type: Bipolar Stepper
• Step Angle: 1.8°
• Holding Torque: 1.9Nm(269.06oz.in)
• Rated Current/phase: 2.8A
• Phase Resistance: 1.13ohms
• Inductance: 4.8mH±20%(1KHz)
• Insulation Class: B 130°C[266°F]
• Frame Size: 57 x 57mm
• Body Length: 76.5mm
• Shaft Diameter: Φ8mm
• Shaft Length: 22mm
• D-cut Length: 18mm
• Number of Leads: 4
• Cable Length: 500mm

Driver Specification

• Output Peak Current: 1.0 - 4.2A(0.71~3.0RMS)
• Input Voltage: DC20V~50V
• Logic Signal Current: 7 - 15mA(Typical 10mA)
• Pulse Input Frequency: 0 - 200kHz
• Pulse Width: 2.5μS
• Isolation Resistance: 500MΩ

Power Supply Specification

• Part Number: S-500-48
• 48V DC 10.5A output
• AC input voltage range: 90~135VAC/180~264VAC
• High efficiency low cost
• Forced air cooling by built-in DC fan
• Low output ripple and yawp
• Over current, over voltage, short circuit and overheat protections
• 215*115*50mm (L*W*H)

Connection