YS Series 4 Axis Stepper CNC Kit 3.00Nm[424.83oz.in] Nema 23 Stepper Motor & Driver & 48V Power Supply

• 4 x 23HS39-5004S: Nema 23 Stepper Motor Bipolar 1.8deg 3.00Nm(424.83oz.in) 5.0A 57x57x100mm 4 Wires
• 4 x DM556Y: Y Series Digital Stepper Driver 1.7-5.6A DC20V-50V for Nema 23, 24, 34 Stepper Motor
• 2 x LE-350-48: 350W 48V 7.3A 115/230V Switching Power Supply Stepper Motor CNC Router Kits

Motor Specification

• Manufacturer Part Number: 23HS39-5004S
• Motor Type: Bipolar Stepper
• Step Angle: 1.8deg
• Holding Torque: 3.00Nm(424.83oz.in)
• Rated Current/Phase:5.0A
• Phase Resistance: 0.6ohms±10%
• Inductance: 2.8mH±20%(1KHz)
• Insulation Class: B 130°C[266°F]
• Frame Size: 57 x 57mm
• Body Length: 100mm
• Shaft Diameter: Φ8mm
• Shaft Length: 21mm
• D-cut Length: 15mm
• Number of Cables: 4
• Cable Length: 400mm

Driver Specification

• Output Peak Current: 1.7 - 5.6A(1.2~4.0RMS)
• Input Voltage: DC20V~50V
• Logic Signal Current: 7 - 15mA(Typical 10mA)
• Pulse Input Frequency: 0 - 200kHz
• Pulse Width: 2.5μS
• Isolation Resistance: 500MΩ

Power Supply Specification

• Part Number: LE-350-48
• Input Voltage: 115/230VAC±20%
• Input Frequency: 47-63Hz
• Input Current: 40A/230VAC
• Output Voltage: 48V
• Output Current: 7.3A
• Rated Output Power: 350W
• Leakage Current: <0.5mA/230VAC
• Dimensions: 215*115*30mm(L*W*H)
• Internal EMI filter
• High efficiency low cost
• Forced air cooling by built-in DC fan
• Over current, over voltage, short circuit and overheat protections

Connection