Home
Suppliers

No supplier

Best Sellers
All best sellers

contact our team








 
3 Axis CNC Router Kit 12.0Nm(1699.68oz.in) Nema 34 Stepper Motor & Driver
  • 3 Axis CNC Router Kit 12.0Nm(1699.68oz.in) Nema 34 Stepper Motor & Driver
  • 3 Axis CNC Router Kit 12.0Nm[1699.68oz.in] Nema 34 Stepper Motor & Driver
  • 3 Axis CNC Router Kit 12.0Nm[1699.68oz.in] Nema 34 Stepper Motor & Driver
  • 3 Axis CNC Router Kit 12.0Nm[1699.68oz.in] Nema 34 Stepper Motor & Driver
  • 3 Axis CNC Router Kit 12.0Nm[1699.68oz.in] Nema 34 Stepper Motor & Driver

3 Axis CNC Router Kit 12.0Nm[1699.68oz.in] Nema 34 Stepper Motor & Driver

3-DM860I-S120
StepMotech
Rating 
$248.77
Quantity

Ask about the product on WhatsApp
Description
This CNC kit included:
  • 3 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
  • 3 x 34HS59-6004S: Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.68oz.in) 6.0A 86x86x151.5mm 4 Wires
  • 3 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply

Driver Specification

  • Anti-Resonance provides optimal torque and nulls mid-range instability
  • Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
  • Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
  • 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
  • Soft-start with no "jump" when powered on
  • Input voltage 20-80VDC
  • 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
  • Pulse input frequency up to 200KHz, TTL compatible and optically isolated input
  • Automatic idle-current reduction
  • Suitable for 2-phase and 4-phase motors
  • Support PUL/DIR and CW/CCW modes
  • Over-voltage, over-current protection

Motor Specification

  • Manufacturer Part Number: 34HS59-6004S
  • Number of phase: 2
  • Step Angle: 1.8deg
  • Holding Torque: 12.0Nm(1699.68oz.in)
  • Rated Current/phase: 6.0A
  • Phase Resistance: 0.7ohms±10%
  • Inductance: 7.9mH±20%(1KHz)
  • Frame Size: 86 x 86mm
  • Body Length: 151.5mm
  • Shaft Diameter: Φ14mm
  • Shaft Length: 37mm
  • Keyway Shaft Length: 25mm
  • Number of Leads: 4
  • Lead Length: 500mm
  • Insulation Class: B 130°C[266°F]

Connection

A+
A-
B+
B-
BLK
GRN
RED
BLU

Power Specification

  • Input Voltage: 115/230VAC±20%
  • Input Frequency: 47-63Hz
  • Input Current: 40A/230VAC
  • Output Voltage: 60V
  • Output Current: 5.8A
  • Rated Output Power: 350W
  • Leakage Current: <0.5mA/230VAC
  • Dimensions: 215*115*30mm(L*W*H)
  • Internal EMI filter
  • High efficiency low cost
  • Forced air cooling by built-in DC fan
  • Over current, over voltage, short circuit and overheat protections
We will gradually replace the power supplies in this kit with the latest model: LE-350-60. The new power supply is an ultra-thin power supply optimized for industrial automation. During the replacement process, each warehouse may randomly ship new and old versions.
The motor comes with a highly flexible cable that can be bent 8 million times without failure.
Product Details
3-DM860I-S120

Data sheet

Frame Size(mm)
Nema 34 (86 x 86)
Shaft Diameter(mm)
14
Holding Torque(Ncm)
1200
SKU_certificated
ISO, CE, UKCA
Inventory Method
Dedicated Inventory
Product Type
Open Loop Stepper Kit
Holding Torque(oz.in)
1699.68
Has Torque/Thrust Curve?
No
Input Voltage Reference(V)
24 - 80DC
No. of Phase
2
Product Series
TS Series
Output Shaft Type
Keyway
Power Supply
Power Supply
Number of Axes
3
Reviews

No customer reviews for the moment.

Write your review

3 Axis CNC Router Kit 12.0Nm[1699.68oz.in] Nema 34 Stepper Motor & Driver

3 Axis CNC Router Kit 12.0Nm[1699.68oz.in] Nema 34 Stepper Motor & Driver

Write your review
16 other products in the same category: