4 Axis CNC Router Kit 13.0Nm[1841oz.in] Nema 34 Stepper Motor & Driver & 60V Power Supply

• 4 x DM860I: Digital Stepper Drive 2.4-7.2A 20-80VDC for Nema 34 Stepper Motor CNC Kit
• 4 x 34HS59-6004S: S Series Nema 34 Stepper Motor Bipolar 1.8deg 12.0Nm(1699.68oz.in) 6.0A 86x86x151.5mm 4 Wires
• 4 x LE-350-60: 350W 60V 5.8A 115/230V Switching Power Supply

Driver Specification

• Anti-Resonance provides optimal torque and nulls mid-range instability
• Motor auto-identification and parameter auto-configuration technology, offers optimal responses with different motors
• Multi-Stepping allows a low resolution step input to produce a higher microstep output, thus offers smoother motor movement
• 16 selectable microstep resolutions including 400, 800, 1600, 3200, 6400, 12800, 25600, 51200, 1000, 2000, 4000, 5000, 8000, 10000, 20000, 40000
• Soft-start with no "jump" when powered on
• Input voltage 20-80VDC
• 8 selectable peak current including 2.40A, 3.08A, 3.77A, 4.45A, 5.14A, 5.83A, 6.52A, 7.20A
• Pulse input frequency up to 200 KHz, TTL compatible and optically isolated input
• Automatic idle-current reduction
• Suitable for 2-phase and 4-phase motors
• Support PUL/DIR and CW/CCW modes
• Over-voltage, over-current protection

Motor Specification

• Manufacturer Part Number: 34HS59-6004S
• Number of phase: 2
• Step Angle: 1.8deg
• Holding Torque: 12.0Nm(1699.68oz.in)
• Rated Current/phase: 6.0A
• Phase Resistance: 0.7ohms±10%
• Inductance: 7.9mH ± 20%(1KHz)
• Frame Size: 86 x 86mm
• Body Length: 151.5mm
• Shaft Diameter: Φ14mm
• Shaft Length: 37mm
• Keyway Shaft Length: 25mm
• Number of Leads: 4
• Lead Length: 500mm
• Insulation Class: B 130°C[266°F]

Connection

Power Specification

• Input Voltage: 115/230VAC±20%
• Input Frequency: 47-63Hz
• Input Current: 40A/230VAC
• Output Voltage: 60V
• Output Current: 5.8A
• Rated Output Power: 350W
• Leakage Current: <0.5mA/230VAC
• Dimensions: 215*115*30mm(L*W*H)
• Internal EMI filter
• High efficiency low cost
• Forced air cooling by built-in DC fan
• Over current, over voltage, short circuit and overheat protections