Home
Suppliers

No supplier

Best Sellers
All best sellers

contact our team








 
iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm(56.64oz.in) 20-36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm(56.64oz.in) 20-36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC
  • iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC

iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC

iDM42-RS06
StepMotech
Rating 
This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.4Nm(56.64oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the PLC in most of point-to-point applications to reduce cost. Rich built-in diagnostic functions and input and output signals make setup easier.The iDM-RS series motors are highly reliable and affordable and performs excellently in many industrial applications such as solar equipment, textile, civil, robotics, power generation equipment, 3C, packaging, etc.
$70.09
Quantity

Ask about the product on WhatsApp
Description

This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.4Nm(56.64oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the PLC in most of point-to-point applications to reduce cost. Rich built-in diagnostic functions and input and output signals make setup easier.
The iDM-RS series motors are highly reliable and affordable and performs excellently in many industrial applications such as solar equipment, textile, civil, robotics, power generation equipment, 3C, packaging, etc.

Key Features

  • Low noise and vibration, smooth motion
  • Protections for over voltage, over current, etc.
  • Motion can be started by External IO or RS485 or HMI
  • 20 – 36VDC supply voltage, max output current 3.0A peak
  • Support Modbus RTU protocol, Internal 16-segment position Commands
  • Support operation modes: Profile Position, Profile Velocity, Homing
  • 7 configurable digital inputs, 3 optically isolated digital outputs
  • RS232 port for tuning software connection, RS485 port for motion control

Electrical Specifications

  • Manufacturer Part Number: iDM42-RS06
  • Holding Torque: 0.4Nm(56.64oz.in)
  • Power Voltage: 20 - 36VDC
  • Insulation Class: B 130°C[266°F]
  • Peak Current: 0.3 - 3.0A
  • Input Logical Voltage: 12 - 24V
  • Output Capability: 24V@100mA
  • Max Baud Rate: 115200
  • Digital Input: 3
  • Digital Output: 1
  • Command Source: Modbus-RTU

Physical Specifications

  • Frame Size: 42 x 42mm
  • Body Length: 73mm
  • Shaft Diameter: 5mm
  • Shaft Length: 24mm
  • Weight: 0.47kg

Operating Environment and other Specifications(Tj = 25°C/77°F)

  • Environment: Avoid dust, oil fog and corrosive gases
  • Humidity: 40%RH - 90%RH
  • Operating Temperature(Heat Sink): 0°C - 40°C(32°F - 104°F )
  • Vibration: 10 - 50Hz/0.15mm
  • Storage Temperature: -20°C - 65°C (-4°F - 149°F)

Packing List

  • 1 x iDM42-RS06
  • 1 x CABLE-PC-1: RS232 cable
  • 1 x CABLE-TX1M0-ISV2: RS485 cable
Product Details
iDM42-RS06

Data sheet

Frame Size(mm)
Nema 17 (42 x 42)
Body Length(mm)
73
Shaft Diameter(mm)
5
Holding Torque(Ncm)
40
SKU_certificated
ISO, CE
Inventory Method
Dedicated Inventory
Product Type
Integrated Stepper Motor
Holding Torque(oz.in)
56.64
Shaft Length(mm)
24
Control Modes
Modbus RS485
Analog Input
No
Encoder Feedback
No (Open Loop)
Input Voltage Reference(V)
24 - 36DC
Input Voltage (V)
20 - 36DC
Reviews

No customer reviews for the moment.

Write your review

iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC

iDM Series NEMA 17 Integrated RS485 Stepper Motor 0.4Nm[56.64oz.in] 20_36VDC

This is a Nema 17 integrated RS485 stepper motor with a holding torque of 0.4Nm(56.64oz.in) . iDM-RS Series is an integrated stepper motor integrated drive, and based on standard Modbus RTU protocol, using RS485 communication can network up to 31 axes. Its built-in single-axis control can save the PLC in most of point-to-point applications to reduce cost. Rich built-in diagnostic functions and input and output signals make setup easier.The iDM-RS series motors are highly reliable and affordable and performs excellently in many industrial applications such as solar equipment, textile, civil, robotics, power generation equipment, 3C, packaging, etc.
Write your review
16 other products in the same category:
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.8Nm(113.29oz.in) 20-36VDC w/ 14-bit Encoder Quick view

Reference: iCL42-08

Brand: StepMotech

iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.8Nm[113.29oz.in] 20_36VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.8Nm(113.29oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements...
$69.49
More
In stock
iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.6Nm(84.96oz.in) 20-36VDC w/ 14-bit Encoder Quick view

Reference: iCL42-06

Brand: StepMotech

iCL Series NEMA 17 Integrated Closed Loop Stepper Motor 0.6Nm[84.96oz.in] 20_36VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 17 integrated closed loop stepper motor with a holding torque of 0.6Nm(84.96oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements...
$64.72
More
In stock
ESS Series 0.48Nm(68.00oz.in) Nema 17 Integrated RS485 Closed Loop Stepper Servo Motor 24VDC 1000CPR Quick view

Reference: ESS17-RS04

Brand: StepMotech

ESS Series 0.48Nm[68.00oz.in] Nema 17 Integrated RS485 Closed Loop Stepper Servo Motor 24VDC 1000CPR

Review(s): 0
The NEMA 17 integrated stepper motor features a holding torque of 0.48Nm(68oz.in), peak current range of 0.8 to 2.0A, input voltage of 24VDC, and a 1000cpr incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.This compact and reliable motion control solution is ideal for industrial automation,...
$61.95
More
In stock
iDM Series NEMA 17 Integrated Stepper Motor 0.3Nm(42.48oz.in) 20-36VDC Quick view

Reference: iDM42-03

Brand: StepMotech

iDM Series NEMA 17 Integrated Stepper Motor 0.3Nm[42.48oz.in] 20_36VDC

Review(s): 0
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm of stepmotech based on its tens of years' experience in stepper and servo controls. Its compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce cable and labor costs.The iDM series are reliable and...
$53.39
More
In stock
iDM Series Nema 24 Integrated Stepper Motor 3.0Nm(424.83oz.in) 20-50VDC Quick view

Reference: iDM60-30

Brand: StepMotech

iDM Series Nema 24 Integrated Stepper Motor 3.0Nm[424.83oz.in] 20_50VDC

Review(s): 0
iDM series is stepper motor integrated a digital stepper driver. It implements advanced control algorithm. At very compact size can save mounting space, eliminate motor wiring time, reduce interference, and cut/reduce cable and labor costs.The iDM series are reliable and affordable and performs excellent in many industrial applications such as CNC, 3D...
$79.93
More
In stock
ESS Series 2.2Nm(311.55oz.in) Nema 23 Integrated RS485 Closed Loop Stepper Servo Motor 24-48VDC 1000CPR Quick view

Reference: ESS23-RS20

Brand: StepMotech

ESS Series 2.2Nm[311.55oz.in] Nema 23 Integrated RS485 Closed Loop Stepper Servo Motor 24_48VDC 1000CPR

Review(s): 0
The NEMA 23 integrated stepper motor features a holding torque of 2.2Nm(311.55oz.in), peak current range of 1.0 to 4.0A, input voltage of 24 - 48VDC, and a 1000cpr incremental encoder. It supports RS485 communication and offers versatile I/O connections for flexible integration.This compact and reliable motion control solution is ideal for industrial...
$72.47
More
In stock
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 2.1Nm(297.38oz.in) 20-50VDC w/ 14-bit Encoder Quick view

Reference: iCLD57-21

Brand: StepMotech

iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 2.1Nm[297.38oz.in] 20_50VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.1Nm(297.38oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements...
$82.91
More
In stock
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 2.3Nm(325.71oz.in) 20-50VDC w/ 14-bit Encoder Quick view

Reference: iCL57-23

Brand: StepMotech

iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 2.3Nm[325.71oz.in] 20_50VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 2.3Nm(325.71oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements...
$79.93
More
In stock
iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 1.3Nm(184.1oz.in) 20-50VDC w/ 14-bit Encoder Quick view

Reference: iCL57-13

Brand: StepMotech

iCL Series NEMA 23 Integrated Closed Loop Stepper Motor 1.3Nm[184.1oz.in] 20_50VDC w/ 14_bit Encoder

Review(s): 0
This is a Nema 23 integrated closed loop stepper motor with a holding torque of 1.3Nm(184.1oz.in) with 14-bit encoder. iCL series is stepper motor integrated 14-bit incremental magnetic encoder and drive to solve the loss of step problems in open loop stepper control systems, thus increase system reliability at minimal cost increase. It implements...
$73.97
More
In stock